|Sensor Tip Diameter||3/16''|
|Accuracy||±0.1°C in the physiological range|
|Time Constant:||2 seconds|
|Lead Length||5 feet|
|Sterilization Protocol||Gas ETO, Gluteraldehyde, Isoprophyl Alcohol|
DPT-24 Immersion Probe for Liquids - 24'' #304 stainless steel welded shaft. Wooden Handle. Diameter is .3/16'' diameter. Immersible. Maximum temperature 350°C, Time constant 2 Seconds. 5 foot lead. Not isolated.
Time Constant is defined as the time required to reach 63% of final temperature in liquid. An accurate reading is obtained when the reading stops changing, typically 5-10 time constants.
Maximum Temperature refers to intermittent use of probe. When probe is used for continuous measurements, maximum temperature should be reduced by 25% unless specified.